Ariston Type C 설치 지침 매뉴얼 - 페이지 19

{카테고리_이름} Ariston Type C에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ariston Type C 44 페이지. Type c boilers
Ariston Type C에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (25 페이지), 설치 지침 매뉴얼 (25 페이지), 설치 지침 매뉴얼 (48 페이지), 설치 및 서비스 지침 (49 페이지)

페이지 인쇄

MAINTENANCE

It is recommended that the following inspections be carried out on the boiler at

least once a year:

1 -

Check the seals for the water connections; replace any faulty seals.

2 -

Check the gas seals; replace any faulty gas seals.

3 -

Visual check of the entire unit.

4 -

Visual check of the combustion process or analysis of combustion by-products

(see section 4.5) and cleaning of the burner if needed.

5 -

If called for by point. 3, dismantling and cleaning of the combustion chamber.

6 -

If called for by point. 4, dismantling and cleaning of the burner jets.

7 -

Visual check of the primary heat exchanger:

- check for overheating in the blade assembly;

- clean the exhaust fan if needed.

8 -

Adjustment of the flow rate of the gas: flow rate for lighting, partial load and full load.

9 -

Check of the heating safety systems:

- safety device for maximum temperature (overheat thermostat);

- safety device for maximum pressure (safety valve).

10- Check of the gas safety systems:

- safety device for lack of gas or flame ionisation (detection electrode);

- safety device for gas cock.

11- Check of the electrical connection (make sure it complies with the instructions

in the manual).

12- General check of the combustion by-products of the discharge/ventilation system.

13- Check of the general performance of the unit.