Whirlpool AWO D5306 매뉴얼 - 페이지 10

{카테고리_이름} Whirlpool AWO D5306에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AWO D5306 14 페이지.

Water supply hose

Check the supply hose regularly for brittleness and cracks and

replace it if necessary using a new hose of the same type (available

from After-Sales Service or specialist dealer).

If your supply hose has a transparent hose coating (fig. "C"),

periodically check the colour of the transparent coating. If the

coating begins to turn red, this is an indication that the hose may

have a leak and should be replaced. Contact our After-Sales Service

team or specialist dealer to obtain a replacement hose.

Mesh filter for water connection

Check and clean regularly.

For washing machines with an inlet hose as shown on pictures "A",

"B" or "C" (depending on the model):

1. Close the tap and loosen the inlet hose on the tap.

2. Clean the internal mesh filter and screw the water inlet hose back

onto the tap.

3. Now unscrew the inlet hose on the rear of the washing machine.

4. Pull off the mesh filter from the washing machine connection

with universal pliers and clean it.

5. Refit the mesh filter and screw the inlet hose on again.

6. Turn on the tap and ensure that the connections are completely

water-tight.