Whirlpool CATALYST 문제 해결 및 수리 매뉴얼 - 페이지 22

{카테고리_이름} Whirlpool CATALYST에 대한 문제 해결 및 수리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool CATALYST 45 페이지. Electronic three-speed automatic washers with catalyst cleaning action
Whirlpool CATALYST에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (15 페이지)

페이지 인쇄

ACCESSING COMPONENTS IN THE WASHER CABINET

Components inside the washer cabinet can be accessed by completely removing

the outer cabinet as one unit. Refer to Figure 5 for the following instructions.

1. Remove the console mounting screws and

tilt the console into the service position.

2. Unplug the lid switch harness connector

from the receptacle in the washer top.

3. Remove the cabinet mounting clips

by placing the flat blade of a screwdriver

in the clip as shown in Figure 5, Inset 1.

4. Rotate the access cover on the washer top clockwise to expose the hose assemblies under-

neath. (Fig. 6)

5. Disconnect the bleach dispenser venturi hoses and the detergent and fabric softener inlet

hoses as indicated in Figure 6.

VENTURI

BLEACH DISPENSER

VENTURI HOSES

6. Pull the inner basket forward, to avoid damage to the tub ring, splash guard and shield. Re-

move

the cabinet by tilting it forward and pulling it away from the washer. (Fig. 7)

Fig. 5

CLIP

Fig. 6

Fig. 7

INSET 1

CLIP

BLEACH DISPENSER

VENTURI HOSE

FABRIC SOFTENER

DISPENSER

OUTLET HOSE

DETERGENT

DISPENSER

INLET HOSE

CABINET