Whirlpool CATALYST Посібник з усунення несправностей та ремонту - Сторінка 22
Переглянути онлайн або завантажити pdf Посібник з усунення несправностей та ремонту для Пральна машина Whirlpool CATALYST. Whirlpool CATALYST 45 сторінок. Electronic three-speed automatic washers with catalyst cleaning action
Також для Whirlpool CATALYST: Інструкція з використання та догляду (15 сторінок)
Друкувати сторінку
ACCESSING COMPONENTS IN THE WASHER CABINET
Components inside the washer cabinet can be accessed by completely removing
the outer cabinet as one unit. Refer to Figure 5 for the following instructions.
1. Remove the console mounting screws and
tilt the console into the service position.
2. Unplug the lid switch harness connector
from the receptacle in the washer top.
3. Remove the cabinet mounting clips
by placing the flat blade of a screwdriver
in the clip as shown in Figure 5, Inset 1.
4. Rotate the access cover on the washer top clockwise to expose the hose assemblies under-
neath. (Fig. 6)
5. Disconnect the bleach dispenser venturi hoses and the detergent and fabric softener inlet
hoses as indicated in Figure 6.
VENTURI
BLEACH DISPENSER
VENTURI HOSES
6. Pull the inner basket forward, to avoid damage to the tub ring, splash guard and shield. Re-
move
the cabinet by tilting it forward and pulling it away from the washer. (Fig. 7)
Fig. 5
CLIP
Fig. 6
Fig. 7
18
INSET 1
CLIP
BLEACH DISPENSER
VENTURI HOSE
FABRIC SOFTENER
DISPENSER
OUTLET HOSE
DETERGENT
DISPENSER
INLET HOSE
CABINET