AEP Span Select Seam 사용 설명서 - 페이지 2
{카테고리_이름} AEP Span Select Seam에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEP Span Select Seam 6 페이지. Narrow batten architectural metal roofing curving machine
페이지 인쇄PANEL CURVING
1.
Set the bottom guide rolls at the upper (of two) scribe lines. This sets the bottom
guides
level to the forming rolls in the machine. It is of the utmost importance that the
panels enter the machine straight and level to the forming rolls. Feed problems may
occur
if the panel does not enter level with the curving rolls. It is also helpful to cut a
®
slight angle on the leading edge of the Select Seam
panels with a pair of snips.
2. Lower the top guide rolls to hold the material in place.
Top guide rolls
SSM Curving Machine Operating Inst.
Page 2 of 6
Rev.12/14/11