AEP Span Select Seam Panduan Petunjuk Pengoperasian - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sander AEP Span Select Seam. AEP Span Select Seam 6 halaman. Narrow batten architectural metal roofing curving machine
Halaman CetakPANEL CURVING
1.
Set the bottom guide rolls at the upper (of two) scribe lines. This sets the bottom
guides
level to the forming rolls in the machine. It is of the utmost importance that the
panels enter the machine straight and level to the forming rolls. Feed problems may
occur
if the panel does not enter level with the curving rolls. It is also helpful to cut a
®
slight angle on the leading edge of the Select Seam
panels with a pair of snips.
2. Lower the top guide rolls to hold the material in place.
Top guide rolls
SSM Curving Machine Operating Inst.
Page 2 of 6
Rev.12/14/11