Whirlpool 1997 F 서비스 매뉴얼 - 페이지 18

{카테고리_이름} Whirlpool 1997 F에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 1997 F 32 페이지. 22 cu. ft. bottom mount refrigerator/freezer

페이지 인쇄

NOTE: The wire leads for the Return Air

Heater and the Auxilliary Return

Air Heater elements are located

inside the freezer thermostat con-

trol box. The wire leads for the

"regular" element are one (1) red

and one (1) white. The wire

leads for the auxilliary element

are both black.

Accessing Component in the Refrigerator Section

Removing the Cold Air Inlet Damper

The cold air inlet control damper is located at the

top center of the refrigerator section. This as-

sembly contains a mechanical thermostat that

operates a dampening door to regulate the flow

of cold air into the refrigerator compartment.

1. Remove the damper control knob.

2. Press in on the two (2) side tabs securing the

control cover to the back panel of the

refrigerator section. (Fig. 18) Then, tip the

control cover forward and pull it up to dislodge

the two (2) tabs at the bottom.

3. Remove the Styrofoam insert and the

two (2) screws securing the damper

control assembly to the back panel

of the refrigerator compartment. (Fig. 19)

Damper

Insert

Screw

Fig. 19

Thermostat

Screw

Damper

Insulation

Damper Control

Tab

Screw

Ground Wire

Screw

Fig. 17

Damper Control Cover

Cover Seen

From Inside

Fig. 18

Tabs

Damper Control

Assembly

Tab