Clam 8419 사용 설명서 - 페이지 3

{카테고리_이름} Clam 8419에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clam 8419 10 페이지.

2. Open the shelter so that the gray top is facing

upward. Make sure that the tent is not twisted or

overlapping the ends of any poles (Photo 2). Do NOT

force the shelter while unfolding.

3. Stand on the skirt of the long side of the shelter, grasp

the loop sewn onto the eyelet in the center of the roof with

one hand, and place your other hand on the opposite side at

the roof line. Pull upward on the loop while pushing on the

roof line until the roof section pops up. (Photo 3).

4. Once the roof is popped up, go to one of the short (5

foot) side of the shelter. Step on the skirt, feet wide

(Photo 4), grab the top corners on both sides and pull

straight up (Photo 5 & 6). Once the wall is up, grasp the

loop sewn onto the eyelet in the center of the short side wall

and pull outward until the wall pops out (Photo 7).

Repeat this procedure for all the walls, going around the

shelter either clockwise or counter-clockwise (Photo 8).

NOTE: It may take a few practice times to get the set-up

process down. Lifting straight up on the side walls is

critical to set-up of the Expedition. This alleviates

binding of the hubs & poles.

Photo 4

Photo 7

Page 3

HUB & BASE CAMP EXPLODED DRAWING

ASSEMBLY INSTRUCTIONS

Photo 5

Photo 8

Photo 2

Photo 3

Photo 6

Photo 9