Whirlpool 27' 취업 지원 - 페이지 14
{카테고리_이름} Whirlpool 27'에 대한 취업 지원을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 27' 36 페이지. Microwave oven and thermal oven
Whirlpool 27'에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (11 페이지), 설치 지침 매뉴얼 (11 페이지), 설치 지침 매뉴얼 (48 페이지), 설치 지침 매뉴얼 (22 페이지), 설치 지침 매뉴얼 (27 페이지), 설치 지침 매뉴얼 (32 페이지), 설치 지침 매뉴얼 (12 페이지), 설치 지침 (5 페이지)
페이지 인쇄
Electronic Dry-Miser
This cycle can be used for most loads. Drying time varies according to type of fabric, size of load and
dryness setting.
•
Set the Cycle Selector Control to the desired dryness.
•
Dryness is determined by an electronic moisture sensor system that "feels" the amount of
moisture in the clothes as they pass over a moisture sensor mounted on the grille assembly
at the front of the drum area. When the selected dryness is reached the dryer goes into a timed
COOL DOWN period of approximately 10 minutes.
•
The End-of-Cycle signal sounds once the cycle is complete.
•
The End-of-cycle signal can be turned OFF by pressing the Cycle Signal OFF pad on the
Clean Touch console.
•
The Finish Guard option will tumble the clothes without heat for about 15 seconds every five
minutes until the door is opened and the clothes removed.
•
The Finish Guard option can be turned OFF by pressing the Finish Guard OFF pad on the
Clean Touch console.
Timed Dry Cycle
This cycle will provide up to 80 minutes of heated drying time.
•
The heating cycle is followed by approximately 10 minutes of COOL DOWN.
•
The End-of-Cycle signal sounds once the cycle is complete.
•
The End-of-cycle signal can be turned OFF by pressing the Cycle Signal OFF pad on the
Clean Touch console.
•
The Tumble Press portion of the Timed Dry Cycle is designed to provide about 15 minutes of
HEATED TUMBLING followed by 10 minutes of COOL DOWN.
SECTION TWO
THEORY OF OPERATION
THEORY OF OPERATION
THEORY OF OPERATION
THEORY OF OPERATION
THEORY OF OPERATION
CONSOLE
TIMER CONTROL
Fig. 6
9