Whirlpool 27' 취업 지원 - 페이지 21

{카테고리_이름} Whirlpool 27'에 대한 취업 지원을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 27' 36 페이지. Microwave oven and thermal oven
Whirlpool 27'에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (11 페이지), 설치 지침 매뉴얼 (11 페이지), 설치 지침 매뉴얼 (48 페이지), 설치 지침 매뉴얼 (22 페이지), 설치 지침 매뉴얼 (27 페이지), 설치 지침 매뉴얼 (32 페이지), 설치 지침 매뉴얼 (12 페이지), 설치 지침 (5 페이지)

Replacing the Blower Wheel

1. Open dryer door and remove lint screen. (Fig. 20) Close the dryer door.

2. Remove two (2) screws from lint duct and remove the lint duct.

3. Remove two (2) screws from blower housing cover and remove blower housing cover. (Fig. 21)

4. Reach behind the blower housing and place a 7/8'' open

end wrench on the motor. (Fig. 22) Rotate the blower

wheel clockwise to lock the motor shaft with the wrench.

Allow wrench to lock against the motor bracket.

5. Using a 3/8'' socket drive with a 3/8'' -1/2'' adapter or

1/2'' drive, remove the blower wheel. (Fig. 23) The

blower wheel has left-hand threads. Rotate the wheel

clockwise to remove. Directional arrows are molded

on the front edge of the wheel showing which way to

turn to loosen and tighten.

Removing Blower Housing

1. Remove the blower wheel.

2. Remove the three (3) blower housing screws.

3. Tip down and pull out blower housing.

4. Disconnect wires from thermal fuse, operating

thermostat and bias heater. (Fig. 24)

Fig. 20

Fig. 21

Fig. 22

Fig. 23

Fig. 24