Whirlpool 7MWGD1930 사용 및 관리 매뉴얼 - 페이지 21

{카테고리_이름} Whirlpool 7MWGD1930에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 7MWGD1930 32 페이지. Electric/gas dryer
Whirlpool 7MWGD1930에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (44 페이지)

페이지 인쇄

Select the desired cycle

Select the desired cycle for your load. See the "Cycle Guide"

for more information about each cycle.

AUTOMATIC CYCLES (CICLOS AUTOMÁTICOS)

You can select a different dryness level, depending on your

load, by turning the knob to dryness level.

Selecting Jeans or Very Dry (Muy Seco) or Delicate (Delicado)

or Less Dry (Menos Seco) automatically adjusts the dryness

level at which the dryer will shut off. Once a dry level is set, it

cannot be changed without stopping the cycle.

Automatic Cycles (Ciclos Automáticos) give the best drying in

the shortest time. Drying time varies based on fabric type, load

size, and dryness setting.

NOTE: Jeans or Muy Seco (Very Dry) removes more load

moisture.

Set cycle settings

Select cycle settings by turning the knob to the desired

position.

NOTE: Not all options and settings are available with all cycles.

TEMPERATURE (TEMPERATURA)

Turn Temperature knob to change the drying temperature

setting. See "Setting Drying Temperature".

WRINKLE PREVENTION (PREVENCIÓN DE ARRUGAS)

FEATURE (ON SOME MODELS)

■ Get 90 minutes of heat-free, periodic tumbling at the end of a

cycle. Turn the Wrinkle Prevention knob to

select Yes or No at any time before the cycle has ended.

■ On some models with a Wrinkle Prevention, cycle will automati-

cally get 40 minutes of heat-free, periodic

tumbling at the end of a cycle.

Select CYCLE SIGNAL (Alarma Fin

de Ciclo) if desired

Turn the Cycle Signal knob to select the desired setting

(Yes or No). The Cycle Signal alarm produces an audible

sound when the drying cycle is finished. Promptly removing

clothes at the end of the cycle reduces wrinkling.

NOTE: When the Wrinkle Prevention setting is selected and

the Cycle Signal is On, the tone will sound every 5 minutes

until the clothes are removed, or the setting remaining time

ends.

Press CYCLE SIGNAL (Alarma Fin

de Ciclo) to begin cycle

Push and hold the Cycle Signal knob to begin the cycle.

Promptly remove garments after cycle has completed to

reduce wrinkling. Use the Wrinkle Prevention feature to avoid

wrinkling when you are unable to remove a load from the

dryer as soon as it stops.