Whirlpool 7MWGD1930 Kullanım ve Bakım Kılavuzu - Sayfa 21
Kurutucu Whirlpool 7MWGD1930 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. Whirlpool 7MWGD1930 32 sayfaları. Electric/gas dryer
Ayrıca Whirlpool 7MWGD1930 için: Kurulum Talimatları Kılavuzu (44 sayfalar)
Sayfayı Yazdır
3.
Select the desired cycle
Select the desired cycle for your load. See the "Cycle Guide"
for more information about each cycle.
AUTOMATIC CYCLES (CICLOS AUTOMÁTICOS)
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting Jeans or Very Dry (Muy Seco) or Delicate (Delicado)
or Less Dry (Menos Seco) automatically adjusts the dryness
level at which the dryer will shut off. Once a dry level is set, it
cannot be changed without stopping the cycle.
Automatic Cycles (Ciclos Automáticos) give the best drying in
the shortest time. Drying time varies based on fabric type, load
size, and dryness setting.
NOTE: Jeans or Muy Seco (Very Dry) removes more load
moisture.
4.
Set cycle settings
Select cycle settings by turning the knob to the desired
position.
NOTE: Not all options and settings are available with all cycles.
TEMPERATURE (TEMPERATURA)
Turn Temperature knob to change the drying temperature
setting. See "Setting Drying Temperature".
WRINKLE PREVENTION (PREVENCIÓN DE ARRUGAS)
FEATURE (ON SOME MODELS)
■ Get 90 minutes of heat-free, periodic tumbling at the end of a
cycle. Turn the Wrinkle Prevention knob to
select Yes or No at any time before the cycle has ended.
■ On some models with a Wrinkle Prevention, cycle will automati-
cally get 40 minutes of heat-free, periodic
tumbling at the end of a cycle.
5.
Select CYCLE SIGNAL (Alarma Fin
de Ciclo) if desired
Turn the Cycle Signal knob to select the desired setting
(Yes or No). The Cycle Signal alarm produces an audible
sound when the drying cycle is finished. Promptly removing
clothes at the end of the cycle reduces wrinkling.
NOTE: When the Wrinkle Prevention setting is selected and
the Cycle Signal is On, the tone will sound every 5 minutes
until the clothes are removed, or the setting remaining time
ends.
6.
Press CYCLE SIGNAL (Alarma Fin
de Ciclo) to begin cycle
Push and hold the Cycle Signal knob to begin the cycle.
Promptly remove garments after cycle has completed to
reduce wrinkling. Use the Wrinkle Prevention feature to avoid
wrinkling when you are unable to remove a load from the
dryer as soon as it stops.
21