Whirlpool AZA-HP 7572 빠른 참조 매뉴얼 - 페이지 5
{카테고리_이름} Whirlpool AZA-HP 7572에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AZA-HP 7572 5 페이지.
페이지 인쇄Before using the machine, please also read the instructions for use carefully!
AZA-HP 7572 – Quick Reference Guide
Indicator lamps and Options
Programme selector knob
The drying programme is selected by
turning this knob.
The "Start (Pause)" indicator lamp
flashes.
"Start (Pause)" button
The drying programme is started by
pressing this button.
The indicator lamp lights up.
Door Filter
The indicator lamp lights up when the
door filter needs to be cleaned.
Clean the door filter at the end of
every drying cycle.
Water container
The indicator lamp lights up when the
water container needs to be emptied.
The drying cycle is automatically
interrupted.
Empty the container and restart the
drying programme.
Empty the water container after
every drying cycle
End
The drying programme is finished.
.
Please unload the dryer
Overdry protection
The indicator lights up when a humidity
controlled programme is selected, to
indicate the activated protection
function.
Gentle
Selecting this option will reduce the
drying temperature.
This option cannot be selected when
the option "Rapid" is selected.
Dry plus
By selecting this option you can
increase the dryness level of the
laundry.
Start delay
Delays the start of the drying cycle by
3, 6 or 9 hours.
Each time the button is pressed the
delay is increased by 3 hours.
Press the "Start (Pause)" button to
confirm the final selection and to start
the dryer.
The lamps above the programme
selector knob are flashing to indicate
the selected time.
During the countdown, the drum will
turn from time to time to redistribute
the laundry and the pump will start to
pump water in the water container.
To cancel or change the previously
set time delay, set the index of the
programme selector knob to "off"
position, or open the door.
5
5019 307 01564
(Subject to technical modifications)