Whirlpool AZB 8680 사용 설명서 지침 - 페이지 12
{카테고리_이름} Whirlpool AZB 8680에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AZB 8680 13 페이지. 7kg condenser tumble dryer with 6th sense , white azb 7570
Whirlpool AZB 8680에 대해서도 마찬가지입니다: 운영 매뉴얼 (6 페이지)
페이지 인쇄
- 1. Table of Contents
- 2. Before Using the Dryer
- 3. Precautions and General Recommendations
- 4. Electrical Connection
- 5. Description of the Dryer
- 6. Reminder - Maintenance and Cleaning
- 7. Cleaning the Lint Filter
- 8. Cleaning the Heat Exchanger
- 9. Drainage System
- 10. Door Reversibility
- 11. Troubleshooting Guide/ After-Sales Service
TROUBLESHOOTING GUIDE/
AFTER-SALES SERVICE
In the event that the dryer malfunctions, one of the following failure codes may be displayed.
Depending on the model of your dryer, the failure may be displayed in letters or by different
blinking LEDs.
Failure code LED failure code
F01
F02
F03
F04
F05
F06
F07
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it. If the failure reoccurs,
F10 - 15
please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 1 hour. Plug the dryer back in and restart it. If the failure reoccurs,
F18
please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it. If the failure reoccurs,
F19
please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 1 hour. Plug the dryer back in and restart it. If the failure reoccurs,
F20
please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it. If the failure reoccurs,
F21
please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it. If the failure reoccurs,
F22
please call the After-Sales Service.
Start LED blinks
Make sure that the door is correctly closed and the heat exchanger correctly positioned. If the failure reoccurs,
2 times per
second when
please call the After-Sales Service.
pressed
Heat exchanger
Make sure that the heat exchanger is correctly positioned. If the failure reoccurs, please call the After-Sales
LED blinks 2
times when Start
Service.
button is pressed
LED not blinking
12
Check to be carried out by customer before service call
Please call the After-Sales Service.
Please call the After-Sales Service.
Please call the After-Sales Service.
Please call the After-Sales Service.
Turn the dryer OFF and unplug it. Make sure that the ambient temperature is
between 5°C and 35°C. Wait for 1 hour. Plug the dryer back in and restart it. If the
failure reoccurs, please call the After-Sales Service.
Turn the dryer OFF and unplug it. Make sure that the ambient temperature is
between 5°C and 35°C. Wait for 1 hour. Plug the dryer back in and restart it. If the
failure reoccurs, please call the After-Sales Service.
Please call the After-Sales Service.
LED blinking