Whirlpool AZB 8680 사용 설명서 지침 - 페이지 9

{카테고리_이름} Whirlpool AZB 8680에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AZB 8680 13 페이지. 7kg condenser tumble dryer with 6th sense , white azb 7570
Whirlpool AZB 8680에 대해서도 마찬가지입니다: 운영 매뉴얼 (6 페이지)

페이지 인쇄

CLEANING THE HEAT EXCHANGER

Before cleaning or carrying out maintenance, switch off the dryer.

Clean the heat exchanger at least every month, or whenever the heat exchanger indicator lamp

lights up (optional feature, depending on the model of your dryer), proceeding as follows.

A. Open the heat exchanger flap and put it to one side.

B. Turn the two locking bars at the side of the heat exchanger towards the

middle, to the horizontal position, and pull the heat exchanger out.

C. Hold the heat exchanger as shown in the picture. Clean it under running

water by turning it around to reach all sides, especially in front and behind.

Wipe away dust and lint from the heat exchanger seals and plates.

Clean the inside of the heat exchanger plates under running water, from

the front side to the back.

D. Remove the lint from the heat exchanger housing by hand or with a

damp cloth. Clean the entire housing from the back to the front side,

ensuring that all lint is removed.

• Fully insert the heat exchanger back into the housing (TOP or HAUT mark

upwards) and lock it again by turning the locking bars back to their original position.

• The heat exchanger does not need to be dry when it is reinserted after cleaning.

• Insert and latch the flap again. The flap can only be closed if the heat

exchanger is correctly positioned.

• The heat exchanger indicator lamp will switch off automatically when

you start the next drying cycle.

The heat exchanger aluminium plates may become discoloured over time,

depending on the model of your dryer.