Whirlpool AZB 8680 운영 매뉴얼 - 페이지 4
{카테고리_이름} Whirlpool AZB 8680에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AZB 8680 6 페이지. 7kg condenser tumble dryer with 6th sense , white azb 7570
Whirlpool AZB 8680에 대해서도 마찬가지입니다: 사용 설명서 지침 (13 페이지)
페이지 인쇄
In the event that the dryer malfunctions, one of the following failure codes may be displayed.
Depending on the model of your dryer, the failure may be displayed in letters or by different
blinking LEDs.
Failure code LED failure code
F01
F02
F03
F04
F05
F06
F07
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it.
F10 - 15
If the failure reoccurs, please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 1 hour. Plug the dryer back in and restart it.
F18
If the failure reoccurs, please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it.
F19
If the failure reoccurs, please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 1 hour. Plug the dryer back in and restart it.
F20
If the failure reoccurs, please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it.
F21
If the failure reoccurs, please call the After-Sales Service.
Turn the dryer OFF and unplug it. Wait for 5 minutes. Plug the dryer back in and restart it.
F22
If the failure reoccurs, please call the After-Sales Service.
Start LED blinks
Make sure that the door is correctly closed and the heat exchanger correctly positioned.
2 times per
second when
If the failure reoccurs, please call the After-Sales Service.
pressed
Heat exchanger
Make sure that the heat exchanger is correctly positioned.
LED blinks 2
times when Start
If the failure reoccurs, please call the After-Sales Service.
button is pressed
LED not blinking
4
Failure codes
Check to be carried out by customer before service call
Please call the After-Sales Service.
Please call the After-Sales Service.
Please call the After-Sales Service.
Please call the After-Sales Service.
Turn the dryer OFF and unplug it. Make sure that the ambient temperature is
between 5°C and 35°C. Wait for 1 hour. Plug the dryer back in and restart it. If the
failure reoccurs, please call the After-Sales Service.
Turn the dryer OFF and unplug it. Make sure that the ambient temperature is
between 5°C and 35°C. Wait for 1 hour. Plug the dryer back in and restart it. If the
failure reoccurs, please call the After-Sales Service.
Please call the After-Sales Service.
LED blinking