Whirlpool AZB 8680 운영 매뉴얼 - 페이지 5

{카테고리_이름} Whirlpool AZB 8680에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AZB 8680 6 페이지. 7kg condenser tumble dryer with 6th sense , white azb 7570
Whirlpool AZB 8680에 대해서도 마찬가지입니다: 사용 설명서 지침 (13 페이지)

페이지 인쇄

Before using the machine, please also read the Instructions For Use carefully!

AZB 7670

Programme selector knob

The drying programme is selected by

turning this knob. The "Start (Pause)"

indicator lamp flashes.

"Start (Pause)" button

The drying programme is started by

pressing this button. The indicator lamp

lights up.

Filter

The indicator lamp lights up when the

filter and/or the heat exchanger and its

housing need to be cleaned.

Clean the filter at the end of every

drying cycle.

Water container

The indicator lamp lights up when the

water container needs to be emptied.

The drying cycle is automatically

interrupted. Empty the container and

restart the drying programme.

Empty the water container after

every drying cycle.

Clean heat exchanger

The LED lights up after 30 cycles when the

heat exchanger needs to be cleaned. After

the heat exchanger has been cleaned, the

indicator lamp will switch off automatically

when the next drying cycle is started.

Quick Reference Guide

Indicator lamps

"Remaining time" display

Depending on the selected programme, a

default drying time is displayed. After the

start of the cycle, the displayed time is

corrected depending on the volume, type

and moisture level of the laundry.

The specified drying time is a

calculated value which will be

updated during the drying cycle.

The flashing lines indicate that the

calculation is in progress. The remaining

time will be updated.

End

The drying programme is finished. Please

unload the dryer.

Overdry protection / 6

The indicator lights up when a humidity

controlled programme is selected, to

indicate the activated protection function.

Key lock

For child safety, this option can be used to

lock all functions of the user interface.

To activate/deactivate this option, the

button must be pressed for 3 seconds.

The only remaining function available is

the "Off" position of the programme

selector knob.

The key lock function remains active even

when the selector knob is turned to the

"Off" position or the door is opened. The

function must be deactivated manually.

Sense