Whirlpool AZB 8680 Посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Сушарка Whirlpool AZB 8680. Whirlpool AZB 8680 6 сторінок. 7kg condenser tumble dryer with 6th sense , white azb 7570
Також для Whirlpool AZB 8680: Інструкція з використання Посібник з використання (13 сторінок)

Whirlpool AZB 8680 Посібник з експлуатації
Before using the machine, please also read the Instructions For Use carefully!
AZB 7670
GB
Programme selector knob
The drying programme is selected by
turning this knob. The "Start (Pause)"
indicator lamp flashes.
"Start (Pause)" button
The drying programme is started by
pressing this button. The indicator lamp
lights up.
Filter
The indicator lamp lights up when the
filter and/or the heat exchanger and its
housing need to be cleaned.
Clean the filter at the end of every
drying cycle.
Water container
The indicator lamp lights up when the
water container needs to be emptied.
The drying cycle is automatically
interrupted. Empty the container and
restart the drying programme.
Empty the water container after
every drying cycle.
Clean heat exchanger
The LED lights up after 30 cycles when the
heat exchanger needs to be cleaned. After
the heat exchanger has been cleaned, the
indicator lamp will switch off automatically
when the next drying cycle is started.
Quick Reference Guide

Indicator lamps

"Remaining time" display
Depending on the selected programme, a
default drying time is displayed. After the
start of the cycle, the displayed time is
corrected depending on the volume, type
and moisture level of the laundry.
The specified drying time is a
calculated value which will be
updated during the drying cycle.
The flashing lines indicate that the
calculation is in progress. The remaining
time will be updated.
End
The drying programme is finished. Please
unload the dryer.
Overdry protection / 6
The indicator lights up when a humidity
controlled programme is selected, to
indicate the activated protection function.
Key lock
For child safety, this option can be used to
lock all functions of the user interface.
To activate/deactivate this option, the
button must be pressed for 3 seconds.
The only remaining function available is
the "Off" position of the programme
selector knob.
The key lock function remains active even
when the selector knob is turned to the
"Off" position or the door is opened. The
function must be deactivated manually.
th
Sense
5