Whirlpool CED9160GW 설치 지침 매뉴얼 - 페이지 11

{카테고리_이름} Whirlpool CED9160GW에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool CED9160GW 32 페이지. Commercial front-load washer

페이지 인쇄

Start Operating Setup

Before proceeding, it is worth noting that, despite all of the

options available, an owner can simply choose to uncrate a

new commercial washer, hook it up, plug it in, and have a washer

that operates.

Washers are preset at the factory for an 11-minute wash period

and 3 rinses (no extra rinse).

SET-UP CODES

The WARM button will advance you from code to code.

■

The HOT button will change the code value.

■

The COLD button will select or deselect options.

■

The set-up code is indicated by the one or two left-hand

characters. The set-up code value is indicated by the two

or three right-hand characters.

NOTE: The first line of each code indicates the factory default

for 9150 models.

CODE

REGULAR CYCLE PRICE (Factory Default)

6. 08

When the d.xx is set to d.00, this 6.xx value

represents the number of coins needed to start the

washer; may adjust from 0–39. Change this value

by pressing the HOT button. 6.08 = 8 coins. 9160

models default to 6.00.

6. 01

When the d.xx is set to d. CS, this 6.xx value

represents the number of push-in actuations of the

coin slide to start the washer. 6.01 would equal one

coin slide activation.

Press the WARM button once to advance

to next code.

7. 11

WASH LENGTH

7. 11

This is the number of minutes for WASH. Washer

comes from the factory preset with 11 minutes.

Choose from 9–17 minutes by pressing the HOT

button.

Press the WARM button once to advance

to next code.

ADDITIONAL RINSE OPTION

8. 00

This option is either SELECTED 'ON' or NOT

SELECTED 'OFF'.

Not Selected 'OFF'.

Selected 'ON'.

Press the COLD button once for this selection.

Press the WARM button once to advance

to next code.

CYCLE COUNTER OPTION

9. 00

This option is either SELECTED 'ON' or NOT

SELECTED 'OFF'.

Not Selected 'OFF'.

Selected 'ON' and not able to be deselected.

Press the COLD button 3 consecutive times to select

'ON'. Once selected 'ON,' it cannot be deselected.

Press the WARM button once to advance

to next code.

MONEY COUNTER OPTION

1. 00

This option is either SELECTED 'ON' or NOT

SELECTED 'OFF'.

EXPLANATION

CODE

Not Selected 'OFF'.

Selected 'ON'.

Press the COLD button three consecutive times

to select 'ON' and three consecutive times to remove

(Not Selected 'OFF'). Counter resets by going

from 'OFF' to 'ON'.

Selected 'ON' and not able to be deselected.

To select 'ON' and not able to be deselected,

first select 'ON', then within two seconds, press

the COLD button twice, HOT once, and exit

the set-up mode.

Press the WARM button once to advance

to next code.

2. 00

SPECIAL PRICING OPTIONS

This option is either SELECTED 'ON' or NOT

SELECTED 'OFF'.

2. 00

Not Selected 'OFF'.

2. SP

Selected 'ON'. Press the COLD button once for this

selection.

If SPECIAL PRICING OPTION is selected, there

is access to codes '3.' thru '9.'

Press the WARM button once to advance

to next code.

OPTIONS TO USE IF SPECIAL PRICING

IS SELECTED:

3. 08

SPECIAL CYCLE PRICE

3. 08

Represents the number of quarters (coin 1) needed

to start the washer; may adjust from 0–39. (See b.xx

setup for VALUE OF COIN 1.) Advance from 0–39 by

pressing HOT. Factory default of 8 quarters = $2.00.

3. 00

Model 9160: Factory default of 0 quarters.

Press the WARM button once to advance

to next code.

5. 00

TIME-OF-DAY CLOCK, MINUTES

5. 00

This is the TIME-OF-DAY CLOCK, minute setting;

select 0–59 minutes by pressing the HOT button.

Press the WARM button once to advance

to next code.

TIME-OF-DAY CLOCK, HOURS

6. 00

NOTE: Uses military time – 24 hr. clock.

6. 00

This is the TIME-OF-DAY CLOCK, hour setting;

select 0–23 hours by pressing the HOT button.

Press the WARM button once to advance

to next code.

SPECIAL PRICE START HOUR

7. 00

NOTE: Uses military time – 24 hr. clock.

7. 00

This is the start hour; select 0–23 hours. Select

START HOUR by pressing the HOT button.

Press the WARM button once to advance

to next code.

SPECIAL PRICE STOP HOUR

8. 00

NOTE: Uses military time – 24 hr. clock.

8. 00

This is the stop hour; select 0–23 hours. Select STOP

HOUR by pressing the HOT button.

Press the WARM button once to advance

to next code.

EXPLANATION