Whirlpool CGM2745FQ 설치 지침 매뉴얼 - 페이지 20

{카테고리_이름} Whirlpool CGM2745FQ에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool CGM2745FQ 28 페이지. Commercial dryer gas or electric

ELECTRIC DRYER ELECTRICAL CONNECTIONS

Connecting 3-Wire Connection: Power Supply Cord (cont.)

3. Connect remaining wires under outer terminal block screws

(F). Tighten screws. Finally, reinstall terminal block cover to

dryer rear panel. Secure cover with hold-down screw. Now

go to "Venting Requirements."

Direct Wire Connection

Remove Terminal Block Cover

Remove hold-down screw and terminal block cover.

Direct Wire Strain Relief

1. Insert strain relief.

Unscrew the removable conduit connector (A) and any

screws from a ¾" (19 mm) UL listed strain relief (UL marking

on strain relief). Put the threaded section of the strain relief

Reaching inside the terminal block opening, screw the

removable conduit connector (A) onto the strain relief threads.

2. Insert conduit into strain relief and tighten clamp.

Put direct wire cable through the strain relief. The strain

relief should have a tight t with the dryer cabinet and be in

a horizontal position. Tighten strain relief screw against the

direct wire cable.

(FOR U.S.A. ONLY)