ABB FDNA-01 빠른 설치 및 시작 매뉴얼

{카테고리_이름} ABB FDNA-01에 대한 빠른 설치 및 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB FDNA-01 2 페이지. Canopen adapter module
ABB FDNA-01에 대해서도 마찬가지입니다: 빠른 설치 및 시작 매뉴얼 (2 페이지)

페이지 인쇄

—

OPTIONS FOR ABB DRIVES

FDNA-01 DeviceNet adapter module

Quick installation and start-up guide

Safety instructions

WARNING! Obey the safety instructions of the drive. If you ignore them, injury or death, or

damage to the equipment can occur.

Mechanical installation

1. Pull out the lock.

2. Install the module carefully to an option

module slot of the drive. See the drive

hardware manual.

3. Push in the lock.

4. Tighten the screw to torque 0.8 N·m

using a Torx TX10 screwdriver.

WARNING! Do not use excessive force, or leave the screw too loose. Over-tightening can

damage the screw or module. A loose screw decreases the EMC performance, and can

cause an operation failure.

Electrical installation



Layout of the module

No.

Description

Lock

Mounting and grounding screw

Bus connector [X1]

Diagnostic LEDs