ABB FENA-21 빠른 설치 및 시작 매뉴얼
{카테고리_이름} ABB FENA-21에 대한 빠른 설치 및 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB FENA-21 2 페이지. Ethernet adapter module
ABB FENA-21에 대해서도 마찬가지입니다: 빠른 설치 및 시작 매뉴얼 (2 페이지)
페이지 인쇄
Options for ABB drives, converters and inverters
Quick installation and start-up guide
FENA-21 Ethernet adapter module
Safety instructions
WARNING! Obey the safety instructions. If you ignore them, injury or death, or damage to the
equipment can occur. See the user's manual.
Mechanical installation
1. Pull out the lock.
2. Install the module carefully to an option
module slot of the drive. See the drive
hardware manual.
3. Push in the lock.
4. Tighten the screw to torque 0.8 N·m using
a Torx TX10 screwdriver.
WARNING! Do not use excessive force,
or leave the screw too loose. Over-
tightening can damage the screw or
module. A loose screw decreases the EMC
performance, and can even cause an operation
failure.
Electrical installation
Layout of the module
1
6
2
3
5
4
1
No.
Description
1
Lock
2
Mounting and grounding screw
3
RJ-45 connector [X1] to Ethernet
4
RJ-45 connector [X2] for chaining another module
5
Diagnostic LEDs
6
MAC ID
3
4