ABB FENA-21 빠른 설치 및 시작 매뉴얼 - 페이지 2

{카테고리_이름} ABB FENA-21에 대한 빠른 설치 및 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB FENA-21 2 페이지. Ethernet adapter module
ABB FENA-21에 대해서도 마찬가지입니다: 빠른 설치 및 시작 매뉴얼 (2 페이지)

페이지 인쇄
ABB FENA-21 빠른 설치 및 시작 매뉴얼
Start-up
When the module is connected to the drive, the drive control program sets the applicable parameters.
See the appropriate drive manual.
Basic parameter settings
Index
Name
20.01
Ext1 commands
22.11
Speed ref1 source
28.11
Frequency ref1 source FBA A ref 1
50.01
FBA A enable
50.02
FBA A comm loss func Fault
Protocol-specific parameter settings
PROFINET IO
Index
Name
51.02
Protocol/Profile
51.04
IP configuration
51.05...08
IP address
51.09
Subnet CIDR
52.01
FBA A data in1
52.02
FBA A data in2
53.01
FBA A data out1
53.02
FBA A data out2
Connectivity configuration
To access the configuration web page:
1. Open a web browser and type the IP address of the
adapter module in the address field.
2. Log in with a user name (admin) and a password (The
last six digits of the MAC address of the adapter module,
in upper case letters, without hyphens. Eg, if MAC ID is
00-1C-01-00-2F-73, the password is 002F73).
o take the settings into use, validate and refresh the parameters with parameter 51.27 FBA par refresh.
T
Further information
See the latest version of FENA-01/-11/-21 Ethernet adapter
module user's manual (3AUA0000093568 [English]) in
ABB library (www.abb.com/drives/documents)
FENA-01/-11/-21 manual
3AXD50000158522 Rev A (EN) 2017-11-23
Value
Fieldbus A
FBA A ref 1
Enable (or select the option slot in which the module is installed).
This activates the communication module. The HOST LED becomes green.
Value
PNIO ABB Pro
Static IP
0.0.0.0
0
SW 16bit
Act 16bit
CW 16bit
Ref1 16bit
.
Ethernet/IP
Index
Name
51.02
Protocol/Profile
51.04
IP configuration
51.05...08
IP address
51.09
Subnet CIDR
51.23
Speed scale
Modbus/TCP
Index
Name
51.02
Protocol/Profile
51.04
IP configuration
51.05...08
IP address
51.09
Subnet CIDR
For more information on fieldbus options and protocols
provided by ABB Drives, see the fieldbus
communications web page
(new.abb.com/drives/connectivity/fieldbus-connectivity).
Fieldbus communications web page
Value
EIP AC/DC
Set the IP address
according your network
configuration.
128
Value
Modbus/TCP
Set the IP address
according your network
configuration.