Whirlpool 36" (91.4 cm) WALL-MOUNT CANOPY RANGE HOOD 설치 지침 및 사용 및 관리 설명서 - 페이지 9

{카테고리_이름} Whirlpool 36" (91.4 cm) WALL-MOUNT CANOPY RANGE HOOD에 대한 설치 지침 및 사용 및 관리 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 36" (91.4 cm) WALL-MOUNT CANOPY RANGE HOOD 28 페이지. 36" (91.4 cm) wall-mount canopy range hood

페이지 인쇄

WARNING

Electrical Shock Hazard

Electrically ground blower.

Connect ground wire to green and yellow ground wire

in terminal box.

Failure to do so can result in death or electrical shock.

8. Use twist-on connectors and connect green or bare wire with

yellow-green wire.

9. Replace terminal box cover.

10. Check all light bulbs to make sure they are secure in their

sockets.

11. Reconnect power.

Complete Installation

1. Check lights and blower operation. See "Use and Care Guide"

section.

If hood does not operate:

■ Check that the circuit breaker is not tripped or house fuse

blown.

■ Disconnect power. Check that wiring is correct.

2. For non-vented (recirculating) installations, install the charcoal

filter. See "Use and Care Guide" section.

3. Place the 2 L-brackets onto the glass hood.

4. Slide the glass hood on the blower housing.

5. Attach M4x35 screws to secure the glass hood.

6. Install vent cover by placing both vent covers on the hood.

7. Secure lower vent cover to hood with 2 screws, one on

either side.

8. Lift upper vent cover to the ceiling.

A. L-bracket

A. Screws

9. Secure upper vent cover to vent cover bracket with 2 screws,

one on either side.

A. Vent cover bracket

B. Upper vent cover

C. Lower vent cover