Whirlpool 806 사용 및 관리 매뉴얼 - 페이지 15

{카테고리_이름} Whirlpool 806에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool 806 31 페이지. Evolution one cooker hood, akr 806 ix
Whirlpool 806에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)

페이지 인쇄

Changing

a cycle

setting

(on some

models)

You can change a cycle setting anytime

during any cycle.

1. Lift up the door latch to stop the cycle.

2. Turn the Cycle Control Knob clockwise to

the desired cycle.

3. Check the detergent dispensers.

They

must be filled properly for the new cycle.

NOTE: Turning the Cycle Control Knob

can cause the covered section of the

detergent dispenser to open and release

the detergent. Check the covered

section if setting Normal Wash or Pots &

Pans cycle.

4. Close the door firmly until it latches. The

dishwasher

starts the new cycle.

Adding

an item during

a cycle

(on some

models)

You can add an item to the dishwasher

anytime before the Cycle Control Knob

reaches Light Wash. Items added after the

Cycle Control Knob reaches Light Wash will

only be rinsed.

1. Lift up the door latch to stop the cycle.

Wait for spraying action to stop before

opening the door.

2. Open the door and add the item.

3. Close the door, but do not latch it. Wait

30 seconds for the air in the dishwasher

to warm up. Doing so reduces the amount

of moisture in the vent when restarting

a cycle.

4. Close the door firmly until it latches. The

dishwasher

resumes the cycle.