Whirlpool 806 Use And Care Manual - Page 15

Browse online or download pdf Use And Care Manual for Ventilation Hood Whirlpool 806. Whirlpool 806 31 pages. Evolution one cooker hood, akr 806 ix
Also for Whirlpool 806: Manual (16 pages)

Print Page

Changing

a cycle

setting

(on some

models)

You can change a cycle setting anytime

during any cycle.

1. Lift up the door latch to stop the cycle.

2. Turn the Cycle Control Knob clockwise to

the desired cycle.

3. Check the detergent dispensers.

They

must be filled properly for the new cycle.

NOTE: Turning the Cycle Control Knob

can cause the covered section of the

detergent dispenser to open and release

the detergent. Check the covered

section if setting Normal Wash or Pots &

Pans cycle.

4. Close the door firmly until it latches. The

dishwasher

starts the new cycle.

Adding

an item during

a cycle

(on some

models)

You can add an item to the dishwasher

anytime before the Cycle Control Knob

reaches Light Wash. Items added after the

Cycle Control Knob reaches Light Wash will

only be rinsed.

1. Lift up the door latch to stop the cycle.

Wait for spraying action to stop before

opening the door.

2. Open the door and add the item.

3. Close the door, but do not latch it. Wait

30 seconds for the air in the dishwasher

to warm up. Doing so reduces the amount

of moisture in the vent when restarting

a cycle.

4. Close the door firmly until it latches. The

dishwasher

resumes the cycle.