Whirlpool AKR8551IX 사용자 및 유지보수 매뉴얼 - 페이지 7

{카테고리_이름} Whirlpool AKR8551IX에 대한 사용자 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AKR8551IX 16 페이지.

MAINTENANCE

ATTENTION:

The metal grease filter has an unlimited life and should be cleaned once a month by hand or in a dishwasher at low

temperature and with a short cycle. Cleaning in a dishwasher may cause discoloring of the grease filter, but its filtering

efficiency is unaffected.

Open the extraction panel (twist upwards).

Note: the panel does not need to be removed.

Pull out the handle to remove the filter.

Wash the filter and leave it to dry, proceeding in reverse order to refit.

CARBON FILTER (filter hoods only)

It retains the unpleasant odors produced during cooking.

Change the carbon filter every 4 months

Fitting or changing the carbon filter

1. Disconnect the hood from the power supply.

2. Open the extraction panel and remove it.

3. Remove the grease filters.

4. Fit one carbon filter each side, covering both protection grilles of the motor impeller. Turn the filters clockwise to

secure them to the middle pins.

Proceed in reverse order to remove.

Re-fit the grease filters and extraction panel.

The hood is equipped with a lighting system based on LED technology.

LEDs ensure excellent illumination, have a service life up to 10 times longer than traditional bulbs, and offer up to 90%

energy savings.

To replace the bulb, proceed as follows:

1. Remove the grease filters.

2. Access the lamps from inside the hood.

3. Press the release clips to release the lamp.

4. Remove the lamp from the hood frame.

5. Disconnect the terminal.

Proceed in reverse order to fit the replacement lamp.

NB: To purchase an LED lamp, please contact the Technical After-sales Service Centre.

- use protective gloves.

- disconnect the appliance from the power supply.

GB7