Whirlpool AKR8551IX Посібник з експлуатації та обслуговування - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з експлуатації та обслуговування для Вентиляційна витяжка Whirlpool AKR8551IX. Whirlpool AKR8551IX 16 сторінок.
Друкувати сторінку
MAINTENANCE
ATTENTION:
GREASE FILTERS
The metal grease filter has an unlimited life and should be cleaned once a month by hand or in a dishwasher at low
temperature and with a short cycle. Cleaning in a dishwasher may cause discoloring of the grease filter, but its filtering
efficiency is unaffected.
Open the extraction panel (twist upwards).
Note: the panel does not need to be removed.
Pull out the handle to remove the filter.
Wash the filter and leave it to dry, proceeding in reverse order to refit.
CARBON FILTER (filter hoods only)
It retains the unpleasant odors produced during cooking.
Change the carbon filter every 4 months
Fitting or changing the carbon filter
1. Disconnect the hood from the power supply.
2. Open the extraction panel and remove it.
3. Remove the grease filters.
4. Fit one carbon filter each side, covering both protection grilles of the motor impeller. Turn the filters clockwise to
secure them to the middle pins.
Proceed in reverse order to remove.
Re-fit the grease filters and extraction panel.
REPLACING LAMPS
The hood is equipped with a lighting system based on LED technology.
LEDs ensure excellent illumination, have a service life up to 10 times longer than traditional bulbs, and offer up to 90%
energy savings.
To replace the bulb, proceed as follows:
1. Remove the grease filters.
2. Access the lamps from inside the hood.
3. Press the release clips to release the lamp.
4. Remove the lamp from the hood frame.
5. Disconnect the terminal.
Proceed in reverse order to fit the replacement lamp.
NB: To purchase an LED lamp, please contact the Technical After-sales Service Centre.
- use protective gloves.
- disconnect the appliance from the power supply.
GB7