Whirlpool AKTT600/IX 건강 및 안전, 사용 및 관리, 설치 설명서 및 온라인 보증 등록 정보 - 페이지 6

{카테고리_이름} Whirlpool AKTT600/IX에 대한 건강 및 안전, 사용 및 관리, 설치 설명서 및 온라인 보증 등록 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AKTT600/IX 22 페이지.

1. Cut out an opening in the bottom of the cabinet by

following the dimensions in Fig. 1

3. Use (2) M4 x 8 screws to install the plastic collar.

4. Lift the hood into opening and ensure locking clip has

locked into position. (locking clip is located on left side

of hood body.) see Fig 2

5. 600mm Model only. Secure upper brackets to left and

right sides of the hood body by using (4) 3/16 x 5/8"

screws . Make sure the (2) captive nut screws holes on the

bracket are facing downward. Fig. 3

6. 600mm Model only. Place lower installation brackets

under upper installation brackets located on left and

right sides of hood body. Note: The wider portion of the

lower installation bracket should be at the bottom.

7. 600mm Model only. Install (4) 3/16x40 screws into

the captive nuts of upper installation brackets.

Tighten is no gap between the cabinet and front edge of

the hood. Fig. 4

8. 900mm Models only. Secure hood body to cabinet

base by (8) #6 x 1" wooden screws through the bottom of

range hood.Fig. 5

ounting

this appliance must be connected with earth wire.

Supply cord must be disconnected from power source before connection (to

the appliance).

ethod

Fig 1

Fig 2

Fig 3

Fig 4

Fig 5

Front