Whirlpool UXT2030AAS 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Whirlpool UXT2030AAS에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool UXT2030AAS 8 페이지. Economy range hood

PREPARE

3. Remove top or rear electrical knockout. (FIG. 2)

THE HOOD - CONT.

5. (UXT3030AA

AND UXT3036AA

ONLY). Install damper/duct

connector over opening made in STEP 4. Use #8B sheet metal

screws provided. (FIG. 3)

UXT2030AA

and UXT2036AA

hoods ONLY) Install Model 87

damper (purchase separately) over opening in top of hood.

ELECTRICAL

KNOCKOUTS

4. (UXT3030AA

and UXT3036AA

hoods ONLY) Remove duct

knockout. Insert screwdriver under edge of knockout, break tabs,

and peet knockout back with pliers. (FIG. 3)

PREPARE THE INSTALLATION

LOCATION

Omit STEP 1 if hood will be installed under cabinets with flush

bottom.

1. (For installation on recessed bottom cabinets only)

Attach a wood filler strip at each side of recessed are under

cabinet. Use two 1" x 2" strips cut to length. If recess is deeper

than 1" use thicker strips. Attach strips with 1-1/4" wood screws,

3" from end end of strip. See FIG. 4.

2. Measure and mark the following (FIGS. 5A & 5B):

a.) Electrical wiring opening in wall or cabinet.

b.) Duct opening in wall or cabinet. (UXT2030AA,

UXT2036AA,

UXT3030AA, and UXT3036AA

ONLY)

13 15116" For 30" RANGE HOOD

16 15/16" For 36" RANGE HOOD

:)OO WI