Whirlpool YUMV4084 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} Whirlpool YUMV4084에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool YUMV4084 24 페이지. Microwave hood combination
Whirlpool YUMV4084에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (15 페이지), 사용 및 관리 매뉴얼 (28 페이지)

페이지 인쇄

Install the Microwave Oven

1. Remove any contents of the microwave oven.

WARNING

Excessive Weight Hazard

Use two or more people to move and install

microwave oven.

Failure to do so can result in back or other injury.

2. Using 2 or more people, lift microwave oven, and place it onto

the L-brackets. Gently slide the microwave oven back against

the rear wall.

3. Check level of microwave oven.

4. Start the leveling screws in the front and back holes of the

L-bracket bases, and adjust the level using the hex key, if

necessary.

5. Place a washer on each 16 mm round-head bolt, then install

each bolt through the L-bracket base slot, into the mounting

hole in the bottom of the microwave oven. Do not overtighten.

Install Damper Assembly

1. Insert damper assembly through the upper cabinet cutout,

and orient it so that the 3 mounting holes are toward the back

of the microwave oven.

A. Damper assembly

B. Upper cabinet cutout

C. 9.5 mm metal screws (5)

2. Secure the damper assembly to the upper component

housing with five 9.5 mm metal screws.