Whirlpool YUMV4084 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Whirlpool YUMV4084에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool YUMV4084 24 페이지. Microwave hood combination
Whirlpool YUMV4084에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (15 페이지), 사용 및 관리 매뉴얼 (28 페이지)

페이지 인쇄

Install Bottom Plate

NOTE: Pre-tap front mounting holes prior to bottom plate

attachment. (See Step 2.)

1. Hook the heads of the screws through the keyholes at the

back of the microwave oven bottom, as shown, then slide

bottom plate back.

2. Secure bottom plate onto microwave oven bottom using two

9.5 mm metal screws through the front mounting holes

1. Measure the distance from the rear wall to the front edge of

the rear frame of the bottom plate.

2. Cut the rear trim to the same measurement.

3. Peel off adhesive strip covers, and place the rear trim against

the rear wall and microwave oven bottom.

NOTE: Make sure trim does not cover the opening for grease

filter.

4. Secure rear trim with three 9.5 mm metal screws.

Install Rear Trim

A. Left side cabinet bottom

B. Bottom plate

C. Rear frame of bottom plate

D. Rear wall

A. Rear trim

B. Adhesive cover

A. Opening for grease filter