CALECTRO SenseAir UG3-A-SENSE 설치 매뉴얼 - 페이지 11

{카테고리_이름} CALECTRO SenseAir UG3-A-SENSE에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CALECTRO SenseAir UG3-A-SENSE 17 페이지. Co2 / temperature transmitter

Mounting of the sensor

The wall plate is screwed onto the wall

The screw head diameter should be max 7,5 mm holes of the wall plate.

The screw head height should be max 2,5 mm

The top part is pushed under the

locking hooks of the wall plate

and is secured with a screw.

If for some reason the PCB must be removed it must be handed carefully

and protected from electrostatic discharge! Normally, removing the PCB is

not required.

A Put the top tabs of the front part into the top

B Press the lower edge of the case onto

the wall plate to latch

Dokument

IMA 242

Rev

Sid

11 (16)