CALECTRO SenseAir UG3-A-SENSE Руководство по установке - Страница 11
Просмотреть онлайн или скачать pdf Руководство по установке для Детекторы газа CALECTRO SenseAir UG3-A-SENSE. CALECTRO SenseAir UG3-A-SENSE 17 страниц. Co2 / temperature transmitter
Печатать страницу
Mounting of the sensor
The wall plate is screwed onto the wall
The screw head diameter should be max 7,5 mm holes of the wall plate.
The screw head height should be max 2,5 mm
The top part is pushed under the
locking hooks of the wall plate
and is secured with a screw.
If for some reason the PCB must be removed it must be handed carefully
and protected from electrostatic discharge! Normally, removing the PCB is
not required.
B
A Put the top tabs of the front part into the top
B Press the lower edge of the case onto
the wall plate to latch
Dokument
IMA 242
A
Rev
1
Sid
11 (16)