Alcohol Countermeasure Systems Alcolock V3 B-2 Series 사용 설명서 - 페이지 10
{카테고리_이름} Alcohol Countermeasure Systems Alcolock V3 B-2 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alcohol Countermeasure Systems Alcolock V3 B-2 Series 20 페이지.
페이지 인쇄
SHARING A VEHICLE
Drivers with their own handset can operate the same vehicle without reprogramming
the ALCOLOCK V3 device. All the custom settings are downloaded into the ECU when
a new handset is connected.
The handset can be changed with the motor on or off.
It is recommended to exchange handsets when the motor is off and the vehicle is
parked at a safe location.
5
1. Pinch the connector at the sides and pull the cable away from
the handset to disconnect.
WARNING! Do not pull on the handset cord. It requires just a
gentle squeeze on the release tabs to disconnect.
2. If the motor is running, the ECU beeps every 15 seconds until
the handset is reconnected.
If the motor is off the ECU will not beep.
3. Reconnect the handset to the handset cable. It makes a click
sound if it is properly connected.
All the handset settings are downloaded to the ECU.
NOTE: If the handset is replaced while the motor is running, a
breath test is required.
ALCOLOCK V3 SERIES B-2