Alcolock IGNITION INTERLOCK WR3 사용 설명서 - 페이지 7

{카테고리_이름} Alcolock IGNITION INTERLOCK WR3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alcolock IGNITION INTERLOCK WR3 16 페이지.

DISCONNECTING THE HANDSET

If you wish to disconnect the Handset for any reason, follow these instructions.

1. To disconnect the Handset pull the sleeve - without turning.

WARNING! The Handset should never be removed while the motor is running. The

following steps must be taken if the Handset is removed while the motor is running.

INSTRUCTION MANUAL

1. The Interface Module will beep twice every 15 seconds to

remind the driver that the Handset is disconnected while the

motor is running.

The main cable will also flash green.

2. To connect the Handset, line up the green arrow of the sleeve

to the main cable green line. You should hear a click!

Once the Handset has been reconnected, it

will display Wait..., followed by the appropriate

message based on the current vehicle state. The

message could read Drive Safely or RETEST.

WARNING! Do not pull on the Handset cord.

The connectors can only be disengaged by

pulling on the sleeve.