Alcolock IGNITION INTERLOCK WR3 사용 설명서 - 페이지 5

{카테고리_이름} Alcolock IGNITION INTERLOCK WR3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alcolock IGNITION INTERLOCK WR3 16 페이지.

Start motor

Drive Safely

RETESTING

RETEST

INSTRUCTION MANUAL

5. If Start Motor is displayed and the status light is solid green,

you passed the breath test.

You may now start the vehicle.

6. Once the WR3 detects the motor running, a Drive Safely

message will be displayed. The vehicle may be driven as

normal.

1. Wait for the Handset to display RETEST. The status light will

be flashing green.

Retests will be required at random times whenever the motor is

running.

WARNING! Never take a retest while driving. Always bring

the vehicle to a safe stop off the roadway before attempting a

retest. You will have up to six (6) minutes to do this.

3. Blow into the mouthpiece with moderate force for 3 seconds,

then make a "Hum" sound while continuing to blow for the

remainder of the test. Do not stop blowing until you hear a beep

from the Handset. The Handset will display Wait... followed by

the test result. If you blew incorrectly, the test will be aborted

and the Handset will display Hum louder, Blow softer, Blow

longer, Blow longer and harder, or Blow then hum. Wait for

the Handset to display RETEST before trying again.