Alcolock IGNITION INTERLOCK WR3 Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Випробувальне обладнання Alcolock IGNITION INTERLOCK WR3. Alcolock IGNITION INTERLOCK WR3 16 сторінок.
Друкувати сторінку
Start motor
Drive Safely
RETESTING
RETEST
INSTRUCTION MANUAL
5. If Start Motor is displayed and the status light is solid green,
you passed the breath test.
You may now start the vehicle.
6. Once the WR3 detects the motor running, a Drive Safely
message will be displayed. The vehicle may be driven as
normal.
1. Wait for the Handset to display RETEST. The status light will
be flashing green.
Retests will be required at random times whenever the motor is
running.
2.
WARNING! Never take a retest while driving. Always bring
the vehicle to a safe stop off the roadway before attempting a
retest. You will have up to six (6) minutes to do this.
3. Blow into the mouthpiece with moderate force for 3 seconds,
then make a "Hum" sound while continuing to blow for the
remainder of the test. Do not stop blowing until you hear a beep
from the Handset. The Handset will display Wait... followed by
the test result. If you blew incorrectly, the test will be aborted
and the Handset will display Hum louder, Blow softer, Blow
longer, Blow longer and harder, or Blow then hum. Wait for
the Handset to display RETEST before trying again.
2