ALcom Premium AT6206 사용자 설명서 - 페이지 4

{카테고리_이름} ALcom Premium AT6206에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ALcom Premium AT6206 9 페이지. Retro

OPERATING INSTRUCION

GETTING STARTED

1. The unit requires 3×1.5V AAA batteries. Open the battery compartment cover and insert the

batteries in the right polarity, then close the cover (Suggest to use alkaline battery). Clock

with date should appear on the LCD screen after the batteries are inserted. Set the clock and

date.

2. Take out handset and curly cord, and plug into handset jack, and plug the 3.5mm jack-plug

into

jack on the base.

3. Insert one end of the line cord to the line jack of the base and the other end to the wall outlet

of exchange.

4. Set the correct dialing mode (P or T) as required by your local telecom service provider.

5. Apply for the caller ID from your local telecom office.

Caution: This phone does not have a mechanical hook switch, but it has a magnetic hook switch. Hence

place the handset in its desired cradle correctly to avoid the line been engaged always. When the corded

handset is unplugged the magnetic hook switch will be automatically disabled and the base can be used as

speaker phone to receive or make calls.

RECEIVING CALLS

1. When a call comes, the telephone rings, and LCD displays the seq. number of the call, the

date, time, incoming number and the NEW icon.

2. For the repeated incoming call, the LCD displays REP icon. When the incoming memory is

full, the latest incoming number replaces the oldest number in the memory.

Note: For the phone to display incoming number and other information, you must have an active Caller ID

subscription with your local telephone exchange company. Generally telecom transmits the incoming

message (eg. Caller ID Info) between the first ring and the second ring. So please answer the telephone after

the second ring.

From the handset

1. Pick up the handset and talk to the other party

2. After finished, return the handset to the base.

Switch to hands free mode

1. When using the handset, press

2. After finished, press

In hands free mode

1. When the telephone rings, press

2. After finished, press

Note: In hands free mode for the other party to hear your voice clearly, speak into the mic

on the base from a distance of 32cm or less.

From the handset

1. Pick up the handset.

2. When hearing the dial tone, dial the desired number.

key and return the handset to the base.

key again.

key and talk to the caller.

key again.

- 3 -