3Com H3C S3100 16C SI 매뉴얼 - 페이지 9
{카테고리_이름} 3Com H3C S3100 16C SI에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com H3C S3100 16C SI 11 페이지. Loopback detection feature manual
H3C Loopback Detection Feature Manual
Release 2107
2.1.4 loopback-detection interval-time
Syntax
loopback-detection interval-time time
undo loopback-detection interval-time
View
System view
Parameter
time: Time interval for loopback detection, in the range of 5 to 300 (in seconds). It is 30
seconds by default.
Description
Use the loopback-detection interval-time command to set time interval for loopback
detection.
Use the undo loopback-detection interval-time command to restore the default time
interval.
Example
# Set time interval for loopback detection to 10 seconds.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] loopback-detection interval-time 10
2.1.5 loopback-detection per-vlan enable
Syntax
loopback-detection per-vlan enable
undo loopback-detection per-vlan enable
View
Ethernet port view
Parameter
None
Description
Use the loopback-detection per-vlan enable command to configure the system to
run loopback detection on all VLANs of the current trunk or hybrid port.
Chapter 2 Loopback Detection Configuration
2-5
Commands