3Com H3C S3100 16C SI Handmatig - Pagina 9
Blader online of download pdf Handmatig voor {categorie_naam} 3Com H3C S3100 16C SI. 3Com H3C S3100 16C SI 11 pagina's. Loopback detection feature manual
Pagina afdrukkenH3C Loopback Detection Feature Manual
Release 2107
2.1.4 loopback-detection interval-time
Syntax
loopback-detection interval-time time
undo loopback-detection interval-time
View
System view
Parameter
time: Time interval for loopback detection, in the range of 5 to 300 (in seconds). It is 30
seconds by default.
Description
Use the loopback-detection interval-time command to set time interval for loopback
detection.
Use the undo loopback-detection interval-time command to restore the default time
interval.
Example
# Set time interval for loopback detection to 10 seconds.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] loopback-detection interval-time 10
2.1.5 loopback-detection per-vlan enable
Syntax
loopback-detection per-vlan enable
undo loopback-detection per-vlan enable
View
Ethernet port view
Parameter
None
Description
Use the loopback-detection per-vlan enable command to configure the system to
run loopback detection on all VLANs of the current trunk or hybrid port.
Chapter 2 Loopback Detection Configuration
2-5
Commands