ALCON CT-88 소유자 매뉴얼 - 페이지 8

{카테고리_이름} ALCON CT-88에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALCON CT-88 9 페이지.

COAXIAL CABLE MOUNING

4. Feed the coaxial cable through the support. Mount the high gain antenna on to the support by

aligning the holes found on the antenna support with those found on the antenna. Secure the

structure by using the screws provided (see illustration).

5. Fix the cable securely using cable clamps and run the cable to the base station unit, then con-

nect it to the back.

Note : The coaxial cable distance can be longer than the 30M avaialble (provided you use the

same or similar specification of cable), but the recommended length is 30M or less (the

less length the better.).

6. When securing the coaxial cable, we recommend you turn the coaxial cable once to make a

small loop (about 15 to 25 cm in diameter) near the antenna support to prevent excessive

load from the cable on the antenna connection and to protect the coaxial cable and antenna

connection from being damaged when accidentally pulled. See illustration for more details.

Fig. 1

RADIALS

30CM

SUPPORT

LOOP

ALIGN THE

HOLES THEN

FIX

U-CLAMPS