Xerox 7700 설치 매뉴얼 - 페이지 25

{카테고리_이름} Xerox 7700에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 7700 42 페이지. Color laser printer
Xerox 7700에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 보충 설명서 (1 페이지), 설정 및 빠른 참조 매뉴얼 (40 페이지), 설치 매뉴얼 (33 페이지), 서비스 매뉴얼 (29 페이지), 서비스 매뉴얼 (17 페이지), 설정 매뉴얼 (2 페이지)

EtherTalk Configuration

If the printer is not in the Chooser, check that the Configuration Page shows a printer

name, a node number, and a zone.

If there is no node number, verify that the printer is properly cabled to the network.

Test the cable segment by plugging in a new cable segment or using the cable segment

of a printer that is in the Chooser.

If your network uses zones, and there is no zone name on the Configuration Page, or if

the Configuration Page shows the wrong zone, see page 22.

Note

If the printer cannot create a zone, it must already exist.

If the Configuration Page shows the correct printer name, node number, and zone, and the

printer is still not visible in the Chooser, check the following items:

If there is a Novell NetWare server on the network, verify that the NetWare server has

been configured for AppleTalk Phase 2 routing and addressing.

If there is a Windows NT server on the network, verify that the printer has not been

captured by a Windows NT machine.

If the printer continually reboots when connected to the network, it is possible that a

router is broadcasting a zone of *, which is an invalid zone.

If using QuickDraw GX, the GX drivers must be installed. If you don't use QuickDraw

GX, disable the QuickDraw GX, QuickDraw Helper, and ColorSync extensions.

Phaser 7700 Color Printer