Xerox 7700 Kurulum Kılavuzu - Sayfa 25

Yazıcı Xerox 7700 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Xerox 7700 42 sayfaları. Color laser printer
Ayrıca Xerox 7700 için: Kullanıcı Kılavuzu (35 sayfalar), Tamamlayıcı Kılavuz (1 sayfalar), Kurulum ve Hızlı Referans Kılavuzu (40 sayfalar), Kurulum Kılavuzu (33 sayfalar), Servis Kılavuzu (29 sayfalar), Servis Kılavuzu (17 sayfalar), Kurulum Kılavuzu (2 sayfalar)

EtherTalk Configuration

If the printer is not in the Chooser, check that the Configuration Page shows a printer

name, a node number, and a zone.

If there is no node number, verify that the printer is properly cabled to the network.

Test the cable segment by plugging in a new cable segment or using the cable segment

of a printer that is in the Chooser.

If your network uses zones, and there is no zone name on the Configuration Page, or if

the Configuration Page shows the wrong zone, see page 22.

Note

If the printer cannot create a zone, it must already exist.

If the Configuration Page shows the correct printer name, node number, and zone, and the

printer is still not visible in the Chooser, check the following items:

If there is a Novell NetWare server on the network, verify that the NetWare server has

been configured for AppleTalk Phase 2 routing and addressing.

If there is a Windows NT server on the network, verify that the printer has not been

captured by a Windows NT machine.

If the printer continually reboots when connected to the network, it is possible that a

router is broadcasting a zone of *, which is an invalid zone.

If using QuickDraw GX, the GX drivers must be installed. If you don't use QuickDraw

GX, disable the QuickDraw GX, QuickDraw Helper, and ColorSync extensions.

Phaser 7700 Color Printer