Xerox 7700 Kurulum Kılavuzu - Sayfa 24

Yazıcı Xerox 7700 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Xerox 7700 42 sayfaları. Color laser printer
Ayrıca Xerox 7700 için: Kullanıcı Kılavuzu (35 sayfalar), Tamamlayıcı Kılavuz (1 sayfalar), Kurulum ve Hızlı Referans Kılavuzu (40 sayfalar), Kurulum Kılavuzu (33 sayfalar), Servis Kılavuzu (29 sayfalar), Servis Kılavuzu (17 sayfalar), Kurulum Kılavuzu (2 sayfalar)

EtherTalk Configuration

Setting Up the Macintosh Ethernet Port for

EtherTalk

From the Apple menu, select Control Panels. Select AppleTalk.

From the Connect via menu, select Ethernet built-in.

Print the Configuration Page (see page 2). Locate the printer's default name.

Verify that the printer is in the Chooser. See below.

When you have located the printer in the Chooser, you may want to change the

printer's name or zone. See Changing the Printer's Name (Optional) on page 21 or

Changing the Printer's EtherTalk Zone (Optional) on page 22.

From the Apple menu, select Chooser.

In the upper-left corner of the Chooser, click the LaserWriter 8 icon. If the

LaserWriter 8 icon is not in the Chooser, you need to install the printer driver.

If a list of zones appears in the lower-left portion of the Chooser, select the proper

zone.

Note

The printer's default zone is listed on the Configuration Page (see page 2) in the

EtherTalk field.

In the right portion of the Chooser, find your printer's name in the list of printers. If

the name does not appear, see page 22.

Note

It is possible for the Printer Name field on the Configuration Page to be blank.

When the printer is turned on, it uses a default name and then checks to see that

no other printer on the network has the same name. If enough printers with the

same default name are present, it can take several minutes for the printer to

establish a unique name. If the Printer Name field on the Configuration Page is

blank, wait a short time and reprint the Configuration Page.

Networking Setup Guide

EtherTalk Configuration