Xerox WORKCENTER 5230 참조 매뉴얼 - 페이지 8
{카테고리_이름} Xerox WORKCENTER 5230에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WORKCENTER 5230 29 페이지. Pdl reference guide
Xerox WORKCENTER 5230에 대해서도 마찬가지입니다: 서비스 매뉴얼 필드 (24 페이지)
페이지 인쇄
Feature
Force
short
edge feeding
Job Mode
Job Type
Interleaving
Paper(Transp
arency
Separator)
Job Based
Accounting
Or
Auditron
Delay Print
dc08cc0440
Customer Support
Implementation
<ESC>&l int O
@PJL SET
PAPERDIRECTION = value
@PJL JOB MODE = value
@PJL SET HOLD = value1
See Example 3,4
@PJL
SET
HOLDKEY
="four-digit string"
@PJL SET SLIPSHEET =
value
@PJL SET JOBATTR =
"@JOAU = string1"
@PJL SET JOBATTR =
"@JOAP = string2"
@PJL SET JOBATTR =
"@DAID = string3"
@PJL SET JOBATTR =
"@PRTM =
YYYY:MM:DD:hh:mm"
Values
Where int is one of the following:
0:
Portrait
1:
Landscape
2:
Reverse Portrait
3:
Reverse Landscape
Where value is one of the following:
SEF: Short Edge Feed
LEF: Long Edge Feed
Where value is one of the following:
PRINTER
for Printer
Where value1 is one of the following:
PROOF:
proof print
STORE:
confidential
print)
The HOLDKEY variable acts as a password
without encryption to protect a held job.
Four-digit string can be any four-digit value
from 0000 to 9999. The default value is "".
When "" (null) is specified, no password is
required.
Where value is one of the following:OFF:
Where string1 is a maximum of 32 characters
(ASCII characters in the range 20h - 7Eh are
allowed Only) as job owner (Capital character
& small character is distinguished)
Where string2 is a maximum of 12 characters
(ASCII characters in the range 20h - 7Eh are
allowed Only) as password without encryption.
It can be null (zero length string)
Where string3 is a maximum of 32 characters
(ASCII characters in the range 20h - 7Eh are
allowed Only) as account ID. It can be null
(zero length string)
Note: Auditron and JBA cannot be used at the
same time. So the same command works for
both modes.
YYYY:MM:DD:hh:mm
YYYY:
year(AD 2000～2099)
MM:
month (1～12)
DD:
day (1～31)
hh:
hour(0～23)
mm:
minute(0～59)
print
(secure
Page 8