Xerox WORKCENTRE 7435 보충 설명서 - 페이지 11
{카테고리_이름} Xerox WORKCENTRE 7435에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WORKCENTRE 7435 49 페이지. Security function
Xerox WORKCENTRE 7435에 대해서도 마찬가지입니다: 참조 매뉴얼 (28 페이지), 브로셔 및 사양 (8 페이지), 사양 (15 페이지), 평가자 매뉴얼 (32 페이지), 사양 (14 페이지), 소프트웨어 업그레이드 (2 페이지), 빠른 시작 매뉴얼 (7 페이지)
페이지 인쇄
Initial Settings Procedures Using
Control Panel
This chapter describes the initial settings related to Security Features, and how to set them on the machine's
control panel.
Authentication for entering the System
Administration mode
1.
Press the <Log In/Out> button on the control panel.
2.
Enter "admin" with the keyboard displayed. This is the factory default "ID".
3.
Select [Next] on the touch screen.
4.
Enter "1111" for passcode from the keyboard.
5.
Select [Enter] on the touch screen.
6.
Select [Tools].
Change the System Administrator's Passcode
1.
Select [Authentication/Security Settings] on the [Tools] screen.
2.
Select [System Administrator Settings].
3.
Select [System Administrator's Passcode].
4.
On the [System Administrator's Passcode] screen, Select [Keyboard].
5.
Enter a new passcode of 9 or more characters in [New Passcode], and select [Save].
6.
In [Retype Passcode], select [Keyboard].
7.
Enter the same passcode, and select [Save] twice.
8.
In the [Do you want to change the System Administrator's Passcode?] screen, select [Yes].
Set Maximum Login Attempts
1.
Select [Authentication/Security Settings] on the [Tools] screen.
2.
Select [Authentication].
3.
Select [Maximum Login Attempts By System Administrator].
4.
On the [Maximum Login Attempts] screen, select [Limit Attempts].
5.
With [
] and [
6.
Select [Save].
], set [5].
11