Xerox WORKCENTRE 7435 보충 설명서 - 페이지 8

{카테고리_이름} Xerox WORKCENTRE 7435에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WORKCENTRE 7435 49 페이지. Security function
Xerox WORKCENTRE 7435에 대해서도 마찬가지입니다: 참조 매뉴얼 (28 페이지), 브로셔 및 사양 (8 페이지), 사양 (15 페이지), 평가자 매뉴얼 (32 페이지), 사양 (14 페이지), 소프트웨어 업그레이드 (2 페이지), 빠른 시작 매뉴얼 (7 페이지)

페이지 인쇄
Xerox WORKCENTRE 7435 보충 설명서

Use of the Overwrite Hard Disk

In order to protect data stored on the hard disk from unauthorized retrieval, you can set the overwrite conditions
to apply to data stored on the hard disk.
You can select the number of overwrite passes from one time or three times. When [1 Overwrite] is selected, "0" is
written to the disk area. When [3 Overwrites] is selected, overwriting is carried out with the method recommended
by the National Security Agency (NSA). [3 Overwrites] ensures higher security than [1 Overwrite].
The setting also overwrites temporarily saved data such as copy documents.
Important:
If the machine is powered off during the overwriting operation, unfinished files may remain on the hard disk.
The overwriting operation will resume if you power the machine on again with the unfinished files remaining
on the hard disk.

Service Representative Restricted Operation

Specifies whether the Service Representative has full access to the security features of the machine, including the
ability to change System Administrator settings.
For the WorkCentre 7425/7428/7435, select [On] and then set [Maintenance Passcode] to restrict the Service
Representative from entering the System Administration mode.
Important:
If the System Administrator's user ID and passcode are lost when [Service Rep. Restricted Operation] is set to [On],
not only you but also we are no longer able to change any setting in the System Administration mode.
8