Xerox 4150 - WorkCentre B/W Laser 시작하기 매뉴얼 - 페이지 20

{카테고리_이름} Xerox 4150 - WorkCentre B/W Laser에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 4150 - WorkCentre B/W Laser 38 페이지. Mfp
Xerox 4150 - WorkCentre B/W Laser에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 평가자 매뉴얼 (24 페이지), 빠른 참조 (1 페이지), 카트리지 교체 (1 페이지), 설치 지침 매뉴얼 (40 페이지), 모듈 설치 매뉴얼 (1 페이지), 하드웨어 설치 매뉴얼 (1 페이지), 트레이 모듈 설치 매뉴얼 (1 페이지), 모듈 설치 매뉴얼 (1 페이지), 설치 매뉴얼 (6 페이지), 경쟁사 비교 (4 페이지), 안전한 설치 및 운영 (4 페이지), 서비스 매뉴얼 (13 페이지)

In the Default File Destination box select Add and enter a name to describe the filing

destination.

Select the correct protocol for the repository in the Protocol menu.

Select and enter either the IP Address or Host Name of the server you want to send your

scanned images to.

In Document Path enter the path to the location of the folder on the server where you want

to store your images. Enter the full path to the folder, starting from the root of FTP services.

Enter the Login Name and Password of the Server to enable the WorkCentre to access the

default repository.

Click Apply.

A default template can now be used on the WorkCentre. You can modify the template or

create new templates from Internet Services.

For more detailed information on Network Scanning, repositories and templates, refer to the

System Administration CD.

Image Overwrite

The Image Overwrite Security Kit is an option kit available for purchase from your Xerox

Sales Representative for all connected WorkCentres.

When a job is processed it is stored on the hard drive. For security, you can delete the

processed jobs from the hard drive using either Immediate Image Overwrite or On Demand

Image Overwrite. On Demand Image Overwrite is initiated as required by the WorkCentre

administrator whereas Immediate Image Overwrite clears the memory on a job by job basis

immediately after each job has been processed.

NOTE:

Copy jobs are not sent across the network or stored in the same way as other types

of jobs, so they do not need to be overwritten.

Installing the kit

Install the kit. Refer to Installing Option Kits on page 15.

Enable Immediate Image Overwrite

Press the Access button to access the Tools pathway.

On the keypad enter [1111] or the current passcode. Touch Enter.

Select Go to Tools > More > Optional Services > Immediate Image Overwrite.

Select Enable, Save and Exit Tools. The feature becomes immediately operational and

requires no further configuration by the System Administrator.

getting started guide