Xerox 4150xf - WorkCentre B/W Laser 시작하기 매뉴얼 - 페이지 10

{카테고리_이름} Xerox 4150xf - WorkCentre B/W Laser에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 4150xf - WorkCentre B/W Laser 38 페이지. Network scanning - wia configuration
Xerox 4150xf - WorkCentre B/W Laser에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 빠른 참조 (1 페이지), 카트리지 교체 (1 페이지), 설치 지침 매뉴얼 (40 페이지), 모듈 설치 매뉴얼 (1 페이지), 하드웨어 설치 매뉴얼 (1 페이지), 트레이 모듈 설치 매뉴얼 (1 페이지), 모듈 설치 매뉴얼 (1 페이지), 설치 매뉴얼 (6 페이지), 매뉴얼 (9 페이지)

Your WorkCentre

Control Panel:

Touch Screen and

Numeric Keypad.

Finisher:

Optional Finisher

collates and staples

output.

Paper Trays:

Tray 1 is standard, Trays

2, 3 and 4 are optional.

All the trays are

functionally the same.

Trays 2, 3 and 4 are

interchangeable.

Inside the WorkCentre

There are 2 Customer Replaceable Units in

the WorkCentre, the SMart Kit Drum

Cartridge (7) and the Toner Cartridge (8).

If the Finisher option is installed there is also

a replacement Staple Cartridge.

The Serial Number (9) is also located here.

If the machine display is on, the Serial

Number can also be seen by pressing the

Machine Status button.

Document Feeder:

Used for scanning multiple

documents. The

Document Glass

underneath is used for

scanning single

documents, bound

documents etc.

Bypass Tray:

Used for non-standard

printing media.

Stand:

Note that a cabinet is

available when trays 3 and

4 are not installed.

getting started guide